Custom Made Leg Assemblies only for the 10′ x 12′ (and 11′ x 17′ Rectangular trampolines)
The 10 x 12 and the 11 x 17 rectangular trampolines have a double truss bar along the length of the trampoline for added strength. As a result, the legs on the length of the trampoline are recessed under the trampoline. In order to attach the enclosure poles to the leg of the trampoline the four recessed legs need to be “brought” out. Custom legs assemblies have been designed solely for this purpose. (see picture below)
Note: Although the 10×14 also has the second truss bar, this bar is under the original truss bar, thus the leg assemblies are not required for this trampoline.
Installed Leg Assembly
One bar of the leg assembly is attached to the leg by means of two clamps (shown below). The other bar has the enclosure pole clamped to it with two additional clamps.
The 10’x12′ and the 11’x17′ trampolines require 24 clamps. The usual 16, 4 clamps for each of the four legs plus 4 addition clamps to attach the leg assembly to the recessed legs.